Fig. 1
Leica DM IRM inverted microscope
1
Lamphousing 106Z with Hg 100 W lamp,
2
Mirrorhousing for 2
lamphousings,
3
3-plate x/y stage 247 x 230 mm, adjustment
range x–y 60 x 40 mm with coaxial drive,
4
Aperture diaphragm
adjustment,
5
Aperture diaphragm centration screws,
6
Field
diaphragm adjustment,
7
Field diaphragm centering buttons,
8
Quintuple objective nosepiece, non-interchangeable, with
M32 x 0.75 mm objective thread,
9
ICR prism dial,
10
Reflector
dial,
11
Coaxial coarse and fine drive,
12
Lateral TV port,
13
Mains switch for integrated 12 V 100 W switch mode power
supply,
14
Brightness adjustment of 12 V 100 W lamp,
15
Trino-
cular tube HCI 3T 22, 45° viewing angle,
16
Switch lever for split-
ting light beam 100 %/100 % or 50 %/50 %,
17
Adapter tube for
photo/TV connection,
18
Analyser slot
2 Intended application, short description
and technical data of the microscope
7
Fig. 2
Leica DM IRM inverted microscope
1
Lamphousing 107 for left-handed operation,
2
Collector
adjustment for lamp centration,
3
Lamp centration screws,
4
Lamp mount for 1 lamphousing,
5
Switch lever for light filters,
6
3-plate x/y stage 247 x 230 mm, x–y adjustment range 60 x 40
mm with coaxial drive,
7
Switch lever for lateral TV port, 80% TV
or 100% TV,
8
Tube lens module 1x or magnification changer 1 x,
1.5 x,
9
Quintuple objective nosepiece, non-interchangeable
with M32 x 0.75 mm objective thread,
10
Coaxial coarse and fine
drive,
11
Binocular tube HCI B 22 with 45° viewing angle,
12
Clamp screw for changing and securing the tube,
13
Incident
light polariser slot,
14
HC PLAN 10x/22 eyepieces
1
2
3
4
7
9
10
18
11
13
14
12
16
15
17
14
6
4
3
3
2
1
11
12
13
9
8
7
5
6
8
5
10
Intended application:
The Leica DM IRM is designed for metallographi-
cal test laboratories for material control and
research of opaque and transparent industrial
materials.
