35
6. Assembly
Ergomodule
For raising the eye level of the tube opening, the
ergomodule may be used.
It is fastened in place with the side clamping
screw.
Mirror Housing
• Place the mirror housing directly onto the
lamp housing receptacle on the back of the
stand and attach it using the side clamping
screw.
• Place the lamp housing onto the mirror hous-
ing and fasten it using the corresponding
clamping screw on the side.
1
1
Fig. 36
1
Insert of Booster Lens
Fig. 37
1
Insert of Excitation Manager
Booster Lens/Excitation Manager
• Insert the filter slide into the front receptacle
on the right side of the stand (36.1, 37.1).
• Booster Lens and Excitation Manager can not
be used simultaneously.
