58
8. Operation
During initialization, the stage will move to a
pre-set position. The stage is lowered. The
motorized tube will be set to the 100% VIS
position. All most recently used settings will be
recalled.
Caution:
The focus position (DM6000 B only) and the
lower threshold will also be stored when
switching off the microscope.
After the initialization is completed, the status
menu of the LeicaScreen (Fig. 65) shows the
current microscope setting.
Note: (Reset-Function)
The microscope can be reset to the default
settings:
• When the microscope is switched off,
press all 3 variable function keys on the
left stand section.
• Switch on the stand.
• Hold the keys pressed down until
initialization is completed.
• The standard information is shown in the
LeicaScreen.
• Switch off the instrument and switch it on
again. The settings are stored now.
Fig. 65
LeicaScreen, menu page ‘Status’
!
