68
7. Start-up
Function Buttons on the Front Panel (Fig. 87)
100% of the light goes to the eye piece
(87.1).
Toggle function for the side ports
(87.2). This function depends on the
individual microscope confi guration.
Note:
Switching to the bottom port:
via the variable function buttons (Lei-
ca DMI6000 B only), switching to top
port: manually.
SHUTTER
Opens and closes the shutter (87.3).
Switches between the possible
mag nifi cations of the magnifi cation
changer (87.4).
The magnifi cation changer is set to
the magnifi cation 1x (87.5).
Fig. 87
Front control panel
1
100% light to eyepiece
2
Toggle ports
3
Shutter
4
Switch between subsequent magnifi cations
5
Subsequent magnifi cation 1x
6
Selecting fi lter cubes
Fig. 88
1
Focus control buttons
2
Open fi lter drawer
CUBE
The CUBE 1 to CUBE 6 (87.6) buttons
permit the direct selection of indi-
vidual fi lter cubes, provided the se-
lected cube is valid for the selected
method.
Press the CUBE 3 and CUBE 4 but-
tons at the same time to display the
assignments of the variable function
buttons. To reset the display, press
the buttons again or wait 3 seconds.
Focus buttons (Fig. 88) (DMI6000 B only)
Moves the Z drive in the indicated di-
rection.
SET +
Z
↑
Sets the upper focus stop.
SET +
Z
↓
Sets the lower stop.
1
Z
↑
Z
↓
2
1x
→
→
→
→
1
3
4
6
6
2
5