92
H:
•
new: the adjusted height
•
ori:
the original measured height
Resid:
Residual or difference between
H new
and
H ori
.
Using a suitable format mask, the adjustment re-
sults and the heights of all adjusted points can be
read out and stored in a file on the PC-card or trans-
ferred to the PC.
Data-Management
The original measurements are kept in the job. With
every adjustment, a new data-block with all new
point-heights is recorded in the current job.
The calculated heights can be viewed using the on-
board data manager.
to view the adjusted heights.