39
9. Accessories
Joint holder
If, for example, you want to compare the casing
sleeves of shell casings, the profiles of the
strike pin impressions on the percussion caps or
the impressions of the extractor one after the
other in one clamping, it is necessary to use
joint holders (49.1). Its joint is fastened with a
knurled screw (49.2).
The joint holders are provided for use as con-
necting pieces for the above-mentioned recep-
tacles, with the exception of the bullet holder. In
addition to the adjustment options provided by
the adjustable holders, they offer an additional
option for rotating and inclining the objects. The
incline of the objects can be locked in place us-
ing the knurled screw (49.2).
Fig. 49
Adjustable holder with joint holder
1
Joint holder
2
Clamping screw
Fig. 48
Adjustable holder with stage ø 25 mm with
ball-and-socket joint
1
Stage ø 25 mm with ball-and-socket joint
2
Clamping screw
Stages ø 25 mm with ball-and-socket joint
The stages ø 25 mm with ball-and-socket joint
(48.1) are inserted into the adapter sleeve of the
adjustable holder.
After releasing the clamping screw (48.2) on the
ball-and-socket joint, the stage surface, which
has a ridged surface, can be inclined arbitrarily.
After aligning the object, retighten the clamping
screw (48.2).
1
2
2
1
Summary of Contents for FS C
