38
WHAT TO DO IF ...
Fault
Cause
Remedy
No circular image is obtained during
viewing.
a) The binoculars are not sufficiently
adapted to your personal interocular
distance.
a) Correct the distance between the two
binocular tubes simply by bending the pivot
axis more or less.
b) The pupils of the viewer are not in
the exit pupil of the binoculars.
b) Correct head, eye and binocular
position.
c) The position of the eyepiece tubes
does not correspond to the correct
use with and without spectacles.
c) Correct adjustment: Wearers of
spectacles screw the eyepiece tubes in;
when viewing without spectacles: Screw
the eyepiece tubes out.
Display not focused
Diopter adjustment is not exact
Carry out diopter adjustment again
The display "
- - -
" appears during
range measurement
a) Measuring range is too long or too
short
Observe the information on the measuring
range
b) The reflectivity of the object is
insufficient
Display flashes or no measurement
possible
Battery discharged
Replace battery
Geovid HD-R (Typ 402-403).indb 38
22.09.2015 09:42:03