Setting Up the Instrument
37
2.4
Instrument Height
Measure instru-
ment height
To get an accurate measurement, hold
the end of measurement tape with your
foot on benchmark. Now expand the
measurement tape and read height using
bottom line on unit as shown.
)
Do not reduce the instru-
ment height reading to its
vertical value!
The instrument height entered in
Cyclone
is automatically computed and reduced
to its vertical value.
)
Take care to use a 1:1 measure,
not a special tape that is scaled
differently (used for common
surveying instruments).
HDS6000_075
149
148
150
151
152
153
2
3
1
