34
Safety Directions
Rugby 200-3.2.1en
Labeling – Class II / 2
Electromagnetic
Compatibility (EMC)
The term "electromagnetic
compatibility" is taken to mean the
capability of the laser unit to function
smoothly in an environment where
electromagnetic radiation and
electrostatic discharges are present,
and without causing electromagnetic
disturbances to other equipment.
WARNING:
Electromagnetic radiation can
cause disturbances in other
equipment.
Although the laser units meet the strict
regulations and standards which are in
force in this respect, Leica
Geosystems cannot completely
exclude the possibility that other
equipment may be disturbed.
CAUTION:
There is a risk that disturbances
may be caused in other equipment if
the laser unit is used in conjunction
with accessories from other
manufacturers, e.g. walkie-talkies,
mobile phones.
Precautions:
Use only the equipment
and accessories recommended by
Leica Geosystems. When combined
with the laser unit, they meet the strict
requirements stipulated by the
guidelines and standards.
CAUTION:
Disturbances caused by
electromagnetic radiation can result in
the tolerance limits for measurements
being exceeded.
Laser
Beam
Plumb Beam
Laser Radiation
Do not stare into beam
Class 2 Laser Product
according to
IEC 60825-1:1993 +
A1:1997 + A2:2001
P
0
≤
3 mW
λ
= 620 - 690 nm
