28
Safety Directions
Rugby 300 SG 1.1.0en
Electromagnetic
Compatibility (EMC)
Description
The term Electromagnetic
Compatibility" is taken to mean the
capability of the product to function
smoothly in an environment where
electromagnetic radiation and
electrostatic discharges are present,
and without causing electromagnetic
disturbances to other equipment.
WARNING:
Electromagnetic radiation can
cause disturbances in other
equipment.
Although the product meets the strict
regulations and standards which are in
force in this respect, Leica
Geosystems cannot completely
exclude the possibility that other
equipment may be disturbed.
CAUTION:
There is a risk that disturbances
may be caused in other equipment if
the product is used in conjunction with
accessories from other manufacturers,
for example field computers, personal
computers, two-way radios, non-
standard cables or external batteries.
Precautions:
Use only the equipment and
accessories recommended by Leica
Geosystems. When combined with the
product, they meet the strict
requirements stipulated by the
guidelines and standards. When using
computers and two-way radios, pay
attention to the information about
electromagnetic compatibility provided
by the manufacturer.
CAUTION:
Disturbances caused by
electromagnetic radiation can result in
errorneous measurements.
Although the product meets the strict
regulations and standards which are in
force in this respect, Leica
Geosystems cannot completely
exclude the possibility that the product
may be disturbed by very intense
electromagnetic radiation, for example
near radio transmitters, two-way
radios or diesel generators.
Precautions:
Check the plausibility of results
obtained under these conditions.
WARNING:
If the product is operated with
connecting cables attached at only one
of their two ends, for example external
supply cables, interface cables, the
permitted level of electromagnetic
radiation may be exceeded and the
correct functioning of other products
may be impaired.
Precautions:
While the product is in use, connecting
cables, for example product to external
battery, product to computer, must be
connected at both ends.
