10)
If you have saved your measurement settings, you can load them
from Load/Save single setting menu. The user defined settings are saved to
your account are last items on the setting list after pre-programmed Leica
settings. Alternatively, sequential settings can be loaded from sequential
settings.
11)
Adjust the detection scheme, open the shutters as needed and adjust
the laser powers as needed. Remember to adjust the beam splitter (BS)
according to your needs
Using CO
2
1) To use the gas exchanger, you must open the air and CO
2
valves as shown
below. Also remember to turn on the gas mixer itself. (Brick, the red box).
