background image

- 111 -

Recording

With this mode, pictures are recorded continuously while moving the camera horizontally, and 
two pictures selected automatically are combined to make a single 3D picture.
To view 3D pictures, a television that supports 3D is required. (This camera will play back in 2D)
Refer to 

P171

 for details about the playback method.

Technique for 3D Photo Mode

Start the recording and then move the camera horizontally 
straight from left to right.

A guide is displayed while recording.

Move the camera approximately 10cm / 4

q

 within approximately 

4 seconds using the guide.

To avoid mistakes in 3D recording

Take the picture of a subject that is not moving.

Take the picture in a well-lit place, such as outdoors, etc.

Fix the focus and exposure by pressing the shutter release 
button halfway, then press it fully and move the camera.

When you start recording with the subject slightly to the right of the center, the subject will be close 
to the center in the final picture.

Notes

You cannot record 3D pictures in vertical orientation.

The 3D pictures are saved in MPO format (3D).

The zoom position is fixed to the shortest focal length.

• The resolution

 is fixed to 2M (16:9).

The ISO sensitivity is automatically adjusted. However, the ISO sensitivity is increased to ensure 
sufficiently fast shutter speeds.

Motion pictures cannot be recorded during 3D Photo Mode.

Recording may not be possible depending on the recording conditions for the following cases. You 
may not get a 3D effect or the picture may be distorted even if it was possible to record.

When the subject is too dark/bright

When the brightness of the subject changes

When the subject is moving

When the subject does not have enough contrast

[3D Photo Mode]

Summary of Contents for V-LUX 4















































































































































































































Reviews: