- 191 -
Others
[Memory card error.
This card cannot be used in this camera.
Format this card?]
•
It is a format that cannot be used with this camera.
>
Insert a different card.
>
Format the card again with the camera after saving necessary data on a computer etc.
(P65)
The data on the card will be deleted.
[Please turn camera off and then on again]/[System Error]
•
This is displayed when the lens has stopped operating normally due to being pressed on by a hand
etc.
>
Turn the camera off and on. If the message persists, contact the dealer or your nearest Leica
Customer Care center
(P203)
.
[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be
used]
>
Use a card compatible with the camera.
(P21)
–
SD Memory Card (8MB to 2GB)
–
SDHC Memory Card (4GB to 32GB)
–
SDXC Memory Card (48GB, 64GB)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
>
Insert the card again.
>
Insert a different card.
[Read Error/Write Error
Please check the card]
•
It has not been possible to read or write data.
>
Remove the card after turning the camera off. Insert the card again, turn the camera on, and try
to read or write the data again.
•
The card may be broken.
>
Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
•
In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format
(P65)
.
•
Depending on the type of the card, motion picture recording may stop in the middle.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
>
If you want to delete some pictures, format the card after saving necessary data on a computer
etc.
(P65)
>
Insert a different card.
