For more information:
www.mojoRTK.com
Page
9
/
10
Document #1022 rev1.8
Backing up stored waylines
1.
Switch on the mojoRTK console and insert a USB stick (the USB stick
should be cleared of all files and folders prior to its use).
2.
Navigate to the main menu. To do this press Esc until you return to the
navigation screen. Then press the OK button.
3.
Use the main dial to scroll down to Settings then press the OK button.
4.
Use the mail dial to select guidance then press the OK button.
5.
Use the main dial to scroll down to Backup Waylines and press the OK
button.
6.
A message will then be displayed indicating if the backup was
successful.
7.
Once the waylines have been backed up shutdown the console.
8.
DO NOT remove the USB stick until the console has fully shutdown
(screen has turned off).
Loading backed up waylines
1.
Switch on the mojoRTK console and insert the USB stick containing the
backed up waylines.
2.
Navigate to the main menu by pressing Esc until you return to the
navigation screen. Then press the OK button.
3.
Use the main dial to scroll down to Settings then press the OK button.
4.
Use the mail dial to select guidance then press the OK button.
5.
Use the main dial to scroll down to Load Waylines and press the OK
button.
6.
You will be prompted to confirm that you wish to load the waylines.
Loading a new set of waylines will ERASE ALL CURRENT WAYLINES.
7.
If you wish to cancel then press the Esc button. If you wish to proceed
with loading the waylines then select the Yes button by using the main
dial then press the OK button.
8.
A message will then be displayed indicating if the load was successful.
Press the OK button to close the message.
9.
The loaded waylines may now be used.
Notes:
Consider labelling your USB sticks when you Backup Waylines. You
might want to use a unique heading from the saved waylines to identify
the USB stick.
The base station location is stored with Waylines when they are
created. The base positions can be imported onto the base station
using a USB stick and the Base Station option Import Waylines.
The wayline file is saved to the USB stick as WaylineDb.xml.
