background image

 

 

Reflective  film,  please  keep  the  reflector  clean  and  bright,  please  do  not  remove  the 
reflector.

 

Check the brakes

 

Please check the brake distance and braking force before each ride. Please remember that 
the  left  hand  brake  will  correspond  to  the  rear  brake,  and  the  right  hand  brake  will 
correspond to the front brake. 
Your  e-bike  is  equipped  with  normal  specifications  of  brake  pads.  Please  check  the  brake 
pads every time, and always check with your dealer to check the brake pads. If the brake 
pads are worn out, please replace them as soon as possible. .

 

Tire pressure

 

40-50  psi  (or  depending  on  the  tire  pressure  written  on  the  side  of  the  tire).  Your  tires 
contain inner tubes. You need to inflate the inner tubes. Please check the pressure of the 
tires before each ride. The tires will gradually lose pressure, this is normal. If you lose too 
much  air  pressure,  please  inflate  again.  If  your  tire  pressure  is  not  enough,  it  will  lead  to 
extra power consumption and fitness and reduces your cruising range.

 

WARNING:

  When  you  brake  heavily  and  cause  the  tire  to  lock  up,  it  will  lead  to  rollover, 

which will lead to major property damage, serious personal injury or death. If you are not 
sure  if  your  brake  adjustment  is  appropriate,  please  contact  your  dealer  or  look  for  a 
professional The technician checks for you.

 

7. Maintenance

 

7.1 Wheels

 

The front and rear wheels of the vehicle should be located at the center of the fork or frame. 
The tension of each spoke on the wheel rim should be similar and the rim should maintain a 
regular circle without bounce or yaw. If there are missing or broken spokes, this will make 
the  rim  lose  smoothness.  Please  ask  your  dealer  or  professional  technician  for  repair  and 
debugging. The rim must be smooth. If it does not, it will increase the resistance of the ride 
or  cause  danger.  If  you  think  you  need  to  adjust,  please  contact  your  dealer  or  find  a 
professional technician to adjust it.

 

7.2 Chain

 

Your e-bike is equipped with a high-quality drive chain, so please keep the chain clean and 
often add lubricant, the grease used in ordinary bicycles is universal.

 

WARNING:

  The  brake  pads  and  rims  must  be  kept  away  from  grease.  Keep  the  rims  and 

brake pads clean.

 

WARNING:

 Moistened or humid air can also cause the brake to break. Please avoid riding in 

wet  or  rainy  weather.  If  you  can't  avoid  it,  please  remember  that  in  the  rain  and  snow 
weather, your braking distance will be several times more than normal. Please ride slowly 
and keep away from other vehicles and brake early. Failure to do so may result in accidents, 
significant  property  damage,  serious  personal  injury  or  death.  If  you  are  unsure  of  the 
performance of your vehicle, please contact your dealer or a professional service technician 
and ask them to test their performance. After each commissioning, please try again in a safe 
place. 
 

Summary of Contents for BB12062






















Reviews: