2. Assembling the e-bike
2.1 General situation does not require you to install it yourself
Your e-bike should be assembled and recharged when you purchase it from the dealer. If you
need to unpack your e-bike and you step on the bicycle, please follow the instructions below
to install.
WARNING:
Incorrect assembly of your e-bike You may cause significant property damage,
severe personal injury or death if you step on the bicycle. If you are not sure if your
operation is correct and appropriate, please contact your dealer.
WARNING:
The motors, controls, meters, batteries, and various lines on your bicycle must
not be used for other purposes. Do not disassemble or adjust these parts, as this will cause
serious damage to these parts and void your warranty. And seriously threaten your personal
safety. If you are unable to understand the content, please contact your dealer.
2.2 Tools and equipment you need to install yourself
4mm hex wrench
5mm hex wrench
6mm hex wrench
Small screwdriver
2.3 Mounting the seat tube
1. Make sure your seat tube quick release lever is open (Picture A)
2. Insert the seat tube into the seat tube socket of the frame (Picture B)
3. Press the quick release lever to the frame and close it. Please confirm that the lever is
locked in place. Failure to do so may result in injury (Picture C).
Picture A Picture B
Picture C
