43
Safety instructions
GB
Do not insert any objects into the openings on the
equipment.
Do not touch the equipment with wet hands or feet or
pull on the electricity cable.
Only hold the cable at the plug; do not pull the lead
out of the plug.
Caution:
The network voltage will continue to circu-
late in the complete ironing system until the equip-
ment is disconnected from the electricity supply.
Do not use the equipment in close proximity to caustic
or explosive substances to avoid explosions and short
circuits.
Do not allow electrical components (on/off switch
for ventilation function, plug etc.) to come into
contact with water.
If the equipment is accidently dropped into water,
the plug should immediately be disconnected from
the supply. Never reach into the water to retrieve
the equipment. There is a risk of electrical shock!
Wind up the complete pressurised steam ironing
system cable in large loops.
Avoid bending the cable. Check the cable for damage.
Turn off the equipment before pulling out the plug.
Remove the plug
• before leaving the room,
• before cleaning and maintaining
the equipment,
• after use.
Never expose the equipment to the effects of wea-
ther such as rain, sun, frost etc. to avoid damage.
Never store the equipment at temperatures of 0 °C
or lower when it is filled with water.
Never use the complete system if the equipment,
connecting hose or protective rubber sleeve are
damaged.
If the connecting hose is damaged, please contact
customer services. Signs of wear and tear on the
connecting hose cover are normal and will not affect
function.
Caution:
Never allow the hot sole of the iron to
touch electrical cables.
The network lead must not come into contact with
sharp corners or hot surfaces under any circum-
stances.
Caution:
If the connection lead of this equipment
is damaged, it must be replaced by the manufac-
turer, customer services or a similar qualified
individual to avoid hazards.
Summary of Contents for AirActive M Express
Page 145: ...149 ...
