Leisure bay spas Celebrity P5S3 Santo, Owner'S Manual

7

P9G3 Factory Set

ELECTRICAL DATA FOR THE USE OF CERTIFIED LICENSED ELECTRICIAN

WARNING: Shock Hazard! Under No Circumstances Should This Spa Be Installed By Anyone

Other Than A Certified Licensed Electrician!

All wiring MUST be in accordance with the National Electrical Code and all local codes.

P5S3 

AND

 P9G3 SERIES DIP SWITCH CONFIGURATION

DIP SWITCH KEY

A grounding lug has been provided on the exterior of the control box to allow connection of a ground wire to a local
grounding point in compliance with the National Electric Code (NEC) and all local codes.

1 Test Mode (normally off)

2 Pump Time Out

In “ON” position, Pump turns off after 30 minutes

In “OFF” position, Pump turns off after 15 minutes

3 Panel Option (must be OFF)

In “ON” position, enables mini panel

In “OFF” position, enables current panel

4 Aux Freeze (must be OFF)

5 Panel Button Layout (must be OFF)

In “ON” position, enables J/L/-/+/w/BLW/AUX

In “OFF” position, enables B/J/T/L or J/T/L

6 Frequency (must be ON)

In “ON” position, 50Hz operation

In “OFF” position, 60Hz operation

7 Mode Changes (must be OFF)

In “ON” position, standard mode only

In “OFF” position, enables standard/economy/sleep

8 Temperature Display

In “ON” position, temperature is displayed in degrees Celsius

In “OFF” position, temperature is displayed in degrees Fahrenheit

9 Blower / Pump 2 Enable

In “ON” position, enables pump 2

In “OFF” position, disables pump 2

10 Amperage Setting

In “ON” position, for low current

In “OFF” position, for high current

P5S3 Factory Set