Page 38
Step 56
Step 57
Step 58
Attach
E8 Clubhouse Rafters
to K2 Rails
front and back with 5/16” X 2 1/2” Hex
Bolts, Lock Washers, Flat Washers and
Spike T-Nuts. Pull E8's together at peak
and attach
to E8's with five
¾” Washer Head Screws.
Y1-19G Small
Attach
X40G-G1 Large Window Frames
to
Bay Windows back and left with four ¾”
Washer Head Screws. Center in each window
opening. Now attach Front Window Frame
X
40-G2 Medium Window Frame
with ¾”
Washer Head Screws.
Attach one
SA1 Clubhouse Roof Board
to left side of
Clubhouse Rafter flush at top and with 2” overhang in front
with 1 ½ Wood Screws. Now on right side flush a SA1 with
the top of SA1 You attached on left side with 2” overhang
in front with 1 ½” Wood Screws. This will hold roof rafters
in place.
E8
E8
K2
K2
SA1
SA1
E8 - Roof Rafter - 1 Hole - 4 Required
1.375 x 3.375 x 49.5 [3.49 x 8.57 x 125.73]
SA1 - Club House Roof Board - 4 Holes - 19 Required
.6875 x 5.25 x 59 [1.75 x 13.34 x 149.86]
-
X40-G1
LARGE
WINDOW FRAME
METAL TRIANGLE
Front
Back
#8 X 3/4
WASHER
HEAD
SCREW
"
#8 X 1-1/2"
WOOD
SCREW
5/16"
INTERNAL
TOOTH
LOCK
WASHER
5/16" FLAT
WASHER
5/16"
SPIKE TEE
NUT
5/16 X 2 1/2"
HEX
HEAD
BOLT
© Copyright Leisure Time Products Inc.
Sky Fort 09-0112
Y1-19G Small
MEDIUM WINDOW FRAME
X40-G2
