SAFETY AND ASSEMBLY INFORMATION
Assembly Safety:
• Keep the work area clean and clear of obstructions.
• Children should stay out of the work area until the safe play area is cleared of obstacles, the gym set has
been completely assembled, all hardware has been tightened and checked and all tools have been picked
up.
• Keep children off the gym set until it has been completely assembled.
• Some parts of the assembly process may require help from another competent adult.
• Do not stand on the platform until the gym set has been completely assembled. Use a step ladder if you
can not reach high enough.
• Follow the manufacturers' safety recommendations for the tools and equipment you use.
•
Avoid assembling your gym set in poor weather conditions.
•
Wear proper clothing and safety equipment (safety glasses, boots and gloves) while assembling
your gym set.
Tools and Materials Required:
Claw Type Hammer
10 ft. Tape Measure
Framing Square or Level
10 ft. Step Ladder
Screwdriver (#2 Phillips)
Electric or Cordless Drill
Rubber Mallet or Pounding Block
Beeswax or Soap
Wrench, Sockets or Nut Drivers(9/16” & 1/2")
(Used to lubricate screw threads)
Drill Bits: 1/8”, 3/16", 3/8" & 7/16"(High Speed)
HAVING THE PROPER TOOLS ON HAND WILL EASE AND
REDUCE THE ASSEMBLY TIME OF YOUR NEW PLAYSET.
ALTHOUGH LEISURE TIME PRODUCTS, INC. READY-TO-ASSEMBLE PLAYSET IS STAINED
AT OUR FACTORY. A WATER PROTECTANT IS REQUIRED AT LEAST ONCE A YEAR.
Page 3 - SAFETY & ASSEMBLY INFO
THE WOODEN PARTS FOR YOUR PLAYSET ARE MADE FROM
CYPRESS AND OTHER UNTREATED NATURALLY DECAY RESISTANT LUMBER,
WITH THE FOLLOWING, POSSIBLE EXCEPTIONS:
© Copyright Leisure Time Products Inc.
Sky Fort 09-0112
