Page 47
Step 78
Lay
E3 Monkey Bar Rails
on flat surface.
(Note: Pilot holes up and match mounting
holes per diagram.) Attach
Monkey
Bar Rungs
to E3 Rails using 5/16” X 1 ½” Joint
Connectors, Lock Washers and Flat Washers.
Note: Drain holes in Y35-22G are facing
down.
Y35-22G
Step 79
Attach four
Y30-40G Brackets
to
E3 Monkey Bar
Rails
using 5/16” X 2” Hex Bolts, Lock Washers,
Flat Washers and 5/16” Lock Nuts.
Step 80
Attach two
Y1-105G Large Triangle Braces
to
E1 Ladder Rails
with 5/16” X
Hex Bolts, Lock Washers, Flat Washers and Spike T-Nuts. Use 5/16” X 3” Hex
Bolts, Lock Washers, Flat Washer, and Spike T-Nuts through E1 and Y1 Triangle
Braces into E3's. Stand Monkey Bar Rails up and attach to Y1 Triangles with
5/16” X 1 ½” Hex Bolts, Lock Washers, Flat Washers and Spike T-Nuts.
1 ½”
E3 - Monkey Bar Rail - 8 Holes - 2 Required
1.375 x 3.375 x 71 [3.49 x 8.57 x 180.34]
LARGE
METAL TRIANGLE
Y35-22G
Monkey Bar Rungs
Y14
E3
5/16 X 1 1/2"
JOINT
CONNECTOR
(5/16")
Lock Nut
ZLN5/16
5/16 X 2"
HEX
HEAD
BOLT
5/16"
INTERNAL
TOOTH
LOCK
WASHER
5/16" FLAT
WASHER
5/16"
SPIKE TEE
NUT
5/16 X 3 "
HEX
HEAD
BOLT
5/16 X 1 1/2"
HEX
HEAD
BOLT
© Copyright Leisure Time Products Inc.
Sky Fort 09-0112
Y1-105G
Y30-40G
2" x2" METAL
BRACKET
Y30-40G
2”
Hex Bolts
& Lock Nuts
2”
Hex Bolts
& Lock Nuts
E3
E3
Y30-40G
E3
E1
Y1-105G
1 ½”
Hex Bolts
Y1-105G
1 ½”
Hex Bolts
E1
Step 81
Stand Monkey Bar Assembly up and level and center in opening on left side of
tower. Using Y30-40G holes as guide, mark Wall Rail K1 and drill 3/8” holes.
Attach to Rail with 5/16” X 1 ¼” Hex Bolts, Lock Washers, Flat Washers, and
Spike T-Nuts per diagram.
Y30-40G
