17
TROUBLE SHOOTING
Problem
Cause
Correction
Treadmill will not start
Treadmill not plugged in
Plug into three prong (grounded) outlet
On / off switch not on
Push the on/off button to on
House circuit breaker tripped
Reset or replace
Treadmill reset switch tripped
Reset treadmill reset switch see reset
switch resetting
Treadmill motor controller fuse
blown
Replace controller
Unit plugged into insufficient
extension cord
Plug directly into wall outlet
Treadmill stop or shuts
off by itself
House circuit breaker tripped
Reset or replace
Treadmill reset switch tripped
Reset treadmill reset switch
Treadmill motor controller fuse
blown
Replace controller
Treadbelt does not run
in center
Treadbelt tension not even
across treadbelt
See treadbelt adjustment
Treadbelt slips
Treadbelt tension too loose
See treadbelt adjustment
Treadbelt hesitates
while being stepped on
Insufficient lubricant on
treadbelt
See treadbelt lubrication
Black particles
collecting under
treadmill
Drive belt is breaking in
Vacuum under treadmill periodically
No display on monitor
On / off switch not on
Push on / off button to on
Monitor does not
display speed or
distance
Reed switch not aligned
properly
see reed switch adjustment
Magnet damaged or missing
from front roller pulley
Replace magnet
Monitor not working properly
Replace monitor
No pulse displayed on
monitor
Hands not on hand pulse
Place two hands on hand pulse
Hands on hand pulse
Replace hand pulse
NOTE:
It is not necessary to return treadmill for a monitor repair. The monitor or console is removable from
the treadmill for repair or replacement - see parts section
Summary of Contents for 1610636-1
Page 7: ...6 ASSEMBLY DIAGRAM...
Page 26: ...25...
