comprehensive instructions for the simple replacement job. The pictures show the 'before' and
'after' situation.
Hatches: L23
The principal differences from the 23SL are that the main hatch does
not incorporate a translucent panel, and it does not slide back, when
open, under a protective garage roof as the the hatch on the 23SL
does. One member built his own garage as can be seen in this
picture.
The forehatch is a single skin grp moulding with a clear gelcoat
panel in the middle to admit light. There is a rubber sealing profile
on the edge of the hatch, which overlaps the upstandion the deck,
which seals it quite effectively. However this is not glued in place,
so it can be easily torn loose. Glueing it in place is the remedy.
The grp of the forehatch is a also bit thin, which causes the hatch
to deform when stepped on. One member laminated an extra layer
of 600 grams glass fabric to the back (pictured) which eliminated
the problem, and allowed the hatch to be walked on.
Repair, Modifications etc
Reference Library Items
Forehatch Hinge Replacement (23SL)
Forehatch
Seal
(L23)
Hatches
in Cockpit
Window Replacement (SL23)
Window Replacement 2 (SL23)
Window Replacement L27
(
same principles as for 23SL)
Forum Items
Forehatch Leak (SL23)
Window Replacement 2 (SL23)
Window Replacement 3 (SL23)
21
