D. Step by Step Lighting Instructions
Step 1.
Remove access panel and locate LP tank in
vented area.
Step 2.
After verifying shutoff valve is in the
“OFF” position, turn gas on at tank.
Step 3.
Make sure AAA battery is installed in
sparker by unscrewing the rubber sparker
cup. Begin pressing sparker.
Step 4.
Make sure electrode is sparking.
Step 5.
Turn shut-off valve to “ON” position while
pushing igniter button.
Step 6.
Adjust flame
WarNINg
Verify sparker is producing spark prior to turning
gas on.
NOTICE:
Due to the physical properties of glass, it is not
uncommon for the included decorative glass beads to
occasionally crack or split. This is completely normal
and should not be cause for concern.
Leisure Activists, Inc. © 2014
6
Carefully remove the appliance and components from
the packaging.
Report to your dealer any parts damaged in shipment.
Read all of the instructions before starting the instal-
lation. Follow these instructions carefully during the
installation to ensure maximum safety and benefit.
WarNINg
Inspect appliance and components for damage.
Damaged parts may impair safe operation.
Do NOT install damaged components.
Do NOT install incomplete components.
Do NOT install substitute components.
Report damaged parts to dealer.
C. Inspect the appliance and Components
