accidental, lengthy transmissions where the
transmitter does not properly unkey(a stuck PTT key,
for instance). Not only could such transmissions be
disruptive to other communications, they could
damage the transmitter. Select Menu 44, and set the
Time-Out Timer to OFF, or in 10-second intervals of
up to 120 seconds. The default setting is 30 seconds.
45
．
[MENU+4+5] TX Stop
（
TxStop
）
The TXStop function disables the transmitter when it
is enabled. If TXStop is enabled, pressing the PTT key
will issue an audible alert tone, indicating that you are
unable to transmit. Select Menu 45, and set it to ON if
you would like to enable this feature. The default
setting is off.
46-49
．
[MENU+4+6/7/8/9]VOX
（
VOX
）
VOX
, or Voice-Operated Transmit, allows you to
transmit by simply speaking into the microphone.
With VOX enabled, you won’t need to press the PTT
key to enable the transmitter. Use Menu 46 to turn
VOX ON or OFF. The default is OFF.
VOX D(Delay):
VOX Delay determines the delay to stop transmitting
after you finish speaking. Set the VOX Delay in Menu
47. Too short a delay will cause the transmitter to
unkey too frequently. Delay can be set from 1 to 4
seconds; the default setting is 3 seconds.
VOX S (Sensitivity):
Summary of Contents for UV-52
Page 1: ......
Page 11: ...Getting Acquainted ...
