Grinders Line - William
- PL72
10
04.
Instructions for use
To make a good cup of coffee, you must know how to use your grinder properly
and will need a bit of practice. Follow the instructions carefully. You can also
refer to the
Quick start guide
where you will find illustrated instructions
Note.
It is important to carefully follow these instructions the first time the grinder
is started, to ensure that it works properly.
A
Open the packaging
A.1
Open the box, take out the grinder and remove all the bags and packing
materials. Place the grinder on a flat surface to grant an optimal stability.
Caution.
The unit weights 6,6 kg.
B
Fill the hopper with coffee beans
B.1
Remove the cover (1).
B.2
Fill the hopper (2) with the chosen coffee beans.
B.3
Place the cover back in its seat.
Caution.
Never use the grinder without the cover on the hopper.
C
Switch the grinder on
Caution.
Ensure that the power supply voltage is the same as that indicated on the
information plate and that the supply system has an adequate circuit breaker.
C.1
Connect one end of the power socket (a) to the socket on the back of the
appliance and the other end (plug) into the wall socket.
C.2
Turn the grinder on by pressing the on/off switch (5). The stand-by led light
(6) will blink for a short time, the LCC display (9) will show the Lelit logo, the
software version and the grinder icon confirming the turning on.
Note.
The led light (6) indicates both the ON/OFF mode as well as the
programming mode.
