INPUT UHF 2
To set the
INPUT 2 UHF
parameters, press
⏎
to enter
the menu.
The same procedures described for input 1 apply for all
settings.
INPUT U 3
OUTPUT
Press
to select the menu
OUTPUT
and press
⏎
to confirm and check the selected output level.
OUTPUT
>LEV:105dBuV
To adjust the output level, press
⏎
and change the
figure where the pointer is positioned to the required
level. Press
⏎
to confirm.
INPUT [2] UHF
INPUT [3] UHF
OUTPUT LEVEL SELECTION
Adjustable from 86 to 106dBµV
LEV:105dBuV
>SLP: 5dB
To adjust the UHF slope select
SLP
and press
⏎,
press
to select the required value and press
⏎
to confirm.
UHF SLOPE
Adjustable from 0 to 5dB
SLP: 5dB
>VHF:- 10dB
To adjust the VHF gain select
VHF
and press
⏎,
press
to select the required value and press
⏎
to confirm.
VHF SLOPE
Adjustable from 0 to -10dB
INPUT 2 UHF
Processable channels
Input: 21... 60
Output: E5... 69
INPUT 3 UHF
Processable channels
Input: 21... 60
Output: E5... 69
To set the
INPUT 3 UHF
parameters, press
⏎
to enter
the menu.
The same procedures described for input 1 apply for all
settings.
Summary of Contents for DSP30-4G
Page 2: ......
