9
RS485 IN & OUT
RS485 standard serial communication interface port.
Allows incoming and outgoing communication between a
DX 26 PLUS
and a PC or other
DX 26
PLUS
units.
The characteristics of the RS485 interface make these ports particularly suitable for remote control
over long distances (difficult with RS232 standard ports) and for
daisy-chaining
several
DX 26 PLUS
.
POWER
Unit’s ON/OFF switch.
Before switching on or off, make certain that the sound system’s amplifiers are off to avoid signal
peaks, which are annoying and sometimes dangerous.
AC ~
Connector for the power supply cable.
Before switching on the unit, make certain that the mains voltage matches that shown on the rear
(a tolerance of up to ±10% is acceptable). Before connecting or disconnecting the power cord,
make certain the ON/OFF switch is in the OFF position.
Rear Panel
Summary of Contents for DX 26 PLUS
