EN
Cleaning the suction float
•
Release the lid of the dirty water tank.
•
Turn the lid over and check that the floats can move freely (fig. 29,
ref. 1).
•
Clean the seals with a moist cloth (fig. 29, ref. 2).
•
Refit the lid.
! INFORMATION
Do not clean seals with ethyl alcohol.
Cleaning the water/detergent tank filter
•
Remove the dirty water tank and the detergent tank and set them
on the floor, referring to the section “Emptying the water/detergent
tank” and “Emptying the dirty water tank”.
•
Remove the filter and wash with water (fig. 30, ref. 1).
Cleaning the suction filter
•
Remove the dirty water tank from the machine and set it on the
floor, referring to the section “Emptying the dirty water tank”.
•
Remove the filter and wash with water (fig. 30, ref. 2).
Cleaning the front squeegee suction hose
•
Remove the dirty water tank and the detergent tank and set them
on the floor, referring to the section “Emptying the water/detergent
tank” and “Emptying the dirty water tank”.
•
Detach the hose from the diverter valve (fig. 31, ref. 1) and from the
front squeegee (fig. 31, ref. 2).
•
Wash the hose by directing water into the bore (fig. 32)
•
Reattach the hose.
Cleaning the rear squeegee suction hose
•
Remove the dirty water tank and the detergent tank and set them
on the floor, referring to the section “Emptying the water/detergent
tank” and “Emptying the dirty water tank”.
•
Pull the handle up perpendicular to the machine.
•
Lower the squeegee by operating the lever.
•
Tilt the machine backwards and rest the handle on the floor.
•
Detach the hose from the diverter valve and from the rear squeegee
(fig. 33, ref. 1).
•
Wash the hose by directing water into the bore (fig. 32)
•
Reattach the hose.
Fig.29
1
2
1
2
Fig.30
Fig.31
Fig.32
1
2
Fig.33
1
22
