.
10
.
INSTRUCTION MANUAL
REVERSE THE DOOR SWING
IMPORTANT INFORMATION
We recommend that you secure the racks in place using adhesive tape to prevent causing damage when
handling the appliance and store all removed parts carefully.
1.
Remove the Hole Cover and Upper Hinge Cover on top side using a flat-head screwdriver.
Remove the Upper Hinge by unscrewing the Hex Head Srews (4pcs). Now carefully lift the Door
off the Bottom Hinge with your assistant and gently set it aside. It is important to keep the
Hinge Washer
on the top of Bottom Hinge for re-installation.
Hole Cover
Upper Hinge Cover
Hex Head Screw (4pcs)
Upper Hinge
Door
2
.
Remove the Lock Hole Cap, Bushing and unscrew the Flat Head Screw(2pcs) from the top of
door frame. Unscrew the Hex Head Screw(2pcs) and remove the Pivot Hinge from the bottom of
door frame. Now turn the door by 180°. Re-install Lock Hole Cover , Flat Head Screw(2pcs) and
Bushing to the top of door frame. Re-install the Pivot Hinge to the bottom of door frame with
the Hex Head Screw(2pcs). Make sure the Pivot Hinge is installed correctly.
Lock Hole Cap
Lock Hole Cap
Bushing
Hex Head Screw
Pivot Hinge
Flat Head Screw
3
.
Remove the Bottom Hinge Cover by prying it off gently with small flat screwdriver. Remove the
