.
4
.
INSTRUCTION MANUAL
ACCESSORY INSTALLATION BEFORE OPERATING
UNPACKING AND CLEANING THE WINE COOLER
•
Remove the exterior and interior packing materials.
•
Let the appliance stand upright for approximately
24 hours
before connecting
it to the power source, which helps to reduce the possibility of a cooling-system
malfunction from handling during transportation.
•
Use a soft cloth to clean the interior surface with lukewarm water.
•
Install the door handle provided with the appliance by following these steps:
LOCK & UNLOCK THE DOOR (FOR OPTION)
●
Lock is an optional function. If your Wine Cooler has such function, a key should be
attached inside the packing of this Manual.
●
Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock
it, please turn clockwise. Please save the key well.
OPERATING THE WINE COOLER
WORKING CLIMATE
•
The appliance is designed for operating from SN to N climate (see below climate class
chart). It is recommended to maintain the ambient around 22-25°C which helps the
appliance working with low power consumption.
Climate Class
Ambient Temperature
SN
10 - 32 °C (50
ºF-90ºF)
N
16 - 32 °C (61
ºF-90ºF)
ST
18 - 38 °C (64
ºF-100ºF)
T
18 - 43 °C (64
ºF-109ºF)
•
If the ambient temperature is above or below the designed climate range, the
performance of the unit may be affected. For example, the appliance operating in
extreme cold or hot conditions may cause interior temperatures to fluctuate, and the
temperature set 5-22°C may not be reached sometimes.
