HDMOD
5F
Quick start guide |
1 x HD (in/out) + A/V in to DVB-T (COFDM) + IR TX
|
3. App INSTALLATION
The HDMOD-5F can be programmed on the field using the following simple steps:
Step 1
Power up the HDMOD-5F, connecting the external power supply. The HDMOD-5F will need 20-30 seconds to
initialize and the status indicator will blink between red and green until the procedure is finished. After the status
indicator remains constantly green, you will be able to connect to the HDMOD-5F.
Step 2
Download the “Lemco” app from Google play or App Store:
This step is not necessary, if you already have installed the app on your phone / tablet.
Step 3
The app has the following icon:
Upon execution, the app will ask you to turn on Bluetooth. Depending on your phone / tablet OS version, you
may be prompted also to turn on GPS / Location / Position. The app does NOT record or use your location. Lo-
cation services are necessary on specific Android OS versions for Bluetooth Low Energy (BLE) access.
The HDMOD-5F utilizes BLE (Bluetooth Low Energy) and does NOT need to be “paired” with your phone / tablet.
If you have paired the device with your phone / tablet, please unpair it.
More information
zx w
You can download full manual at www.lemco.tv
Contact Information
Lemco IKE
Latheas 46 - 13678
Athens - Greece
www.lemco.tv
Tel: +30 210 2811401
Fax: +30 210 2825755
Email: info@lemco.gr
