HDMOD
5L
|
1 x HD (in/out) to DVB-T (COFDM)
|
OPERATION MANUAL v1.0
6
4. INSTRUCTIONS
4.1 - App installation
The HDMOD-5L can be programmed on the field using the following simple steps:
Step 1
Power up the HDMOD-5L, connecting the external power supply. The HDMOD-5L will
need 20-30 seconds to initialize and the status indicator will blink between red and
green until the procedure is finished. After the status indicator remains constantly
green, you will be able to connect to the HDMOD-5L.
Step 2
Download the “Lemco” app from Google play or App Store:
This step is not necessary, if you already have installed the app on your phone / tablet.
Step 3
The app has the following icon:
Upon execution, the app will ask you to turn on Bluetooth. Depending on your phone
/ tablet OS version, you may be prompted also to turn on GPS / Location / Position.
The app does NOT record or use your location. Location services are necessary on
specific Android OS versions for Bluetooth Low Energy (BLE) access.
The HDMOD-5L utilizes BLE (Bluetooth Low Energy) and does NOT need to be “paired”
with your phone / tablet. If you have paired the device with your phone / tablet, please
unpair it.The factory default PIN is 1234.