DTV -
Headend
| MLF-101
Manual
© 2020 Lemco. All rights reserved.
13
Multi-stream section
Tuner status
In case the tuner is lock to a satellite multi-stream transponder the first available stream will be chosen by default.
The user is able to freely select which stream he wants to receive/ distribute from the Stream ID selection area.
Moreover, in case PLS is needed the user is able to set the PLS from the available field.
For each input the MLF-101 provides several information such as tuner status (Locked/Unlocked), total bitrate,
signal strength, quality etc.
4.2.5 - “TS configuration” page
At the “TS configuration” page (Figure No 5) the user is able to setup the by-pass mode of the device.
Bypass Mode
With the term “Bypass” we mean that the device is able to receive the transport stream (TS) from one input and
send it to one output (modulator) without doing any kind of multiplexing. In this case, all PIDs or programs are not
able to be changed and there are transfer transparently to one output.
The user is able to select if Input No 1,2,3 or No 4 wants to be send to Output No1,2,3 or No4 respectively using
bypass mode by selecting the appropriate check box. (Figure No 5)
•
Figure No 5
