12
7.4. AUT Operation
Pressing the pedal/button AUT you start the automatic return from any position to table position in the se-
quence:
7.5. Adjustment of the head
The tilt of the head can be manually adjusted with the lever located
under the head pillow.
Release the lever to fix the head in the wished position (up or down).
Moreover, the head pillow has a hole for the face that can be covered
by the special oval pad.
7.6. Adjustment of the arm rests
The arm rests can be manually lowered by means of the lever that is
located on the side of each arm rest.
Release the lever to fix the arm rest in the wished position.
To raise the arm rest always use the same lever.
1-
descent of the table
2-
waiting of about 20 seconds
3-
descent of tilt (seat/legs)
4-
descent of the back
Button A:
lifting of the table
Button A1:
descent of the table
Button B:
lifting of the back
Button B1:
descent of the back
Button C:
lifting tilt (seat)
Button C1:
descent tilt (seat)
Button D:
lifting of the beck + seat
Button D1:
descent of the beck + seat
Button AUT:
automatic return from any
position to table position (horizontal
and fully lowered) see §7.4
Button END:
automatic return from any
position to “End of treatment” posi-
tions.
HAND REMOTE CONTROL
A
A1
B
B1
C
C1
D
D1
AUT
END
