Entering values
21
5 ENTERING
VALUES
For both the configuration and use of the terminal as well as the connected ISO-
BUS machines require values to be entered, edited or selected.
Any value change/selection is made though so-called input dialog boxes. These
dialog boxes are shown through currently active
control screen
. Once the chan-
ges have been made the input dialog box is closed and you will return to the
con-
trol screen
.
INFORMATION
The OK button is used to accept the newly set specified value in the input dialog boxes, i.e. the
previous value is overwritten.
Alternatively, the new value can also be accepted by pressing the scroll wheel.
INFORMATION
The ESC button can also be used to cancel any actions in all the input dialog boxes, i.e. the previ-
ous value is then retained.
Alternatively, the action can also be cancelled using the ESC key on the keypad.
5.1 Input dialog box for numerical values
If a numerical value is selected in a
control screen
, then this input dialog box ap-
pears.
There are 3 display forms for the input dialog box for numerical values, which by
pressing the button enables a change to be made between the OK and ESC but-
tons.
Proceed as follows to change a numerical value:
1. Choose the value to be changed in the control screen.
To do so, simply press the value in the touch screen
- or -
turn the scroll wheel until the value turns white and then push the scroll wheel.
2. The input dialog box is opened.
3. Enter the new specified value .
The entry method depends on the display form.
4. You can exit the input dialog box by pressing either OK or ESC.
