Chain on Smallest
Sprocket
Chainstays Resting
on Axle
FIGURE 3.2
FIGURE 3.1
Spacer Outside
Frame
Spacer Inside
Frame
Road Bike / Triathlon Bike
Mountain / Cyclocross Bike
BICYCLE MOUNTING INSTRUCTIONS
MOUNTING YOUR BICYCLE TO THE LEMOND REVOLUTION
Note:
With the rear wheel removed guide the rear of your bicycle over top of the
4.
R
EVOLUTION
and ensure
that the chain rests on the smallest sprocket of the cassette on the
R
EVOLUTION
and the bicycle chain
stays rest on the axle of the
R
EVOLUTION
. (Figure 3.2)
Note:
If you are using a time trial
bike with the
R
EVOLUTION
you will need to remove the
skewer completely to install
your bike.
The LeMond
Revolution
is shipped from the factory equipped with a Shimano /SRAM 8/9/10/11-Speed
cassette adapter. If your bike is equipped with a Campagnolo
®
derailleur, please follow the instructions on Pg.
14 to change cassettes and cassette adapters. If you are unsure about the type of derailleur installed on your
bike please consult the documentation for your bicycle or visit your local bike specialist to ensure proper
compatibility with the
Revolution.
Shift the chain on your bicycle to the smallest sprocket on the rear cassette.
1.
Open the rear brake calipers on your bicycle and remove the rear wheel.
2.
!
WARNING:
CONSULT THE MANUFACTURER’S DOCUMENTATION FOR YOUR BICYCLE OR YOUR
LOCAL BIKE SPECIALIST IF YOU ARE UNSURE ABOUT THE CORRECT PROCEDURE FOR REMOV
ING THE REAR WHEEL OF YOUR BICYCLE.
Loosen the quick-release axle on the
3.
R
EVOLUTION
and locate the axle spacer on the fan side of the
axle. Be sure to position the spacer properly based on the type of bicycle you are using. (See Figure 3.1)
11