background image

CONGRATULATIONS!

You have just become a valued LeMond Revolution customer. Our team is committed to making your cycling 

customer support you can depend on. We want to thank you for purchasing the exciting LeMond 

R

EVOLUTION

 

bike trainer.

The 

R

EVOLUTION

 

has been tested and is endorsed by some of America’s top cyclists. Our company founder, 

Greg LeMond, inspired a design for a new bike trainer, and the result is truly remarkable. Greg’s story is 

and most physically demanding event in the world–the Tour de France. Only nine months later in April 

of 1987, he narrowly escaped death when he was accidentally shot in a hunting accident. During a long 

and painful rehabilitation, he set a goal that many considered inconceivable; to win the Tour de France 

again. In 1989, he achieved that goal, and then proved it was no mere stroke of luck by winning the Tour 

a third time in 1990.

Greg’s passion for cycling combined with exceptional design innovation establish the 

R

EVOLUTION

 

as 

the new standard in bike trainers. Every component of the 

R

EVOLUTION

 has been designed to be more 

user-friendly than any other trainer on the market and deliver an incredible workout. Whether you are a 

The 

R

EVOLUTION

R

EVOLUTION

 will give you the workout and enjoyment you 

want and need.

This Owner’s Manual will help you get the most enjoyment from your new 

R

EVOLUTION

 

bike trainer. In 

to help you get the most out of your exercise routine. If you have any questions about this information, 

please call us at (612) 486-5750 and we will be happy to assist you. To help us answer your questions 

quickly, please have the serial number of your bike trainer ready when you call. The serial number of your 

trainer is located on the belt cover beneath the pulley assembly.

Summary of Contents for Revolution 250202-2
























Reviews: