- 1 -
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of dangerous voltage within
the product s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons
present.
Warning: to reduce the risk of
electric shock, do not remove
or open the casing of the
product. There are no user -
serviceable part inside. Refer
servicing to qualified service
personnel.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating
and
maintenance
(servicing)
instructions
in
the
literature
accompanying
the
appliance.
CAUTION: Please read through these instructions, so you will know how to operate your equipment
properly.
1.
Do not use this apparatus near water.
2.
Clean only with dry cloth.
3.
Do not block any ventilation openings. Install in accordance with the manufactures instructions.
4.
Do not install near any heat sources or open flames such as radiators, heat registers, stoves, lit candles
or matches, or other apparatus (including amplifiers) that produce heat.
5.
Do not ignore the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
6.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at the point where it exits from the apparatus.
7.
Only use attachments/accessories specified by the manufacturer.
8.
Unplug the apparatus during lightening storm or when unused for long periods of time.
9.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged
in any way, such as damage to the power cord, liquid or other objects falling into the apparatus,
exposure to rain or moisture, abnormal operation, or physical impact.
Dripping warning: The product shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the product.
Ventilation warning: The normal ventilation of the product shall not be impeded for intended use.
Disconnect device warning the
Main plug is used as the connection, so it should always remain ready to
operate.
Warning Message:
The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
It shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Do not place the product in closed bookcases or racks without proper ventilation.
CLASS 1 LASER PRODUCT
Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
ESD Remark (I1) : In case of malfunction due to electrostatic discharge just reset the product (reconnect
of power source may be required) to resume normal operation.
