6
SAFETY PRECAUTIONS (continued)
Scratched discs
If your disc is badly scratched, it will not play. You may be able to repair the disc if you use a disc polisher.
Cleaning the Lens
If the lens becomes dirty, it may cause a skipping of sound during DVD / CD operation. Clean the lens with a
commercially available lens cleaner and blower or carefully wipe it with a soft dry cloth.
Declaration of Conformity
Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.
Lenco recommends using A-brand batteries for longer life and better results.
When the batteries will not be used for a few weeks or more, remove them to avoid
damage that can be caused by battery leakage or corrosion.
Battery shall not be exposed to excessive heat such as sunshine or fire.
IMPORTANT NOTE:
The USB memory stick should be plugged into the unit directly. Don’t use an USB
extension cable because it can cause interference resulting in failing of data.
Where to install
Locate the unit away from direct sunlight, soft indirect lighting is recommended for
comfortable viewing. Place the unit on a sturdy platform of which the surface should be flat.
This will prevent it from falling over. Make sure the unit is located in a position where it
cannot be pushed or hit by objects, as pressure will break or damage the unit, and so that
small objects cannot be inserted into the ventilation slots or openings in the cabinet.
