LENCO IR-2002, Instruction Manual

UK-1

SAFETY PRECAUTIONS

-        Read all the instructions carefully before using the unit and keep them for future reference.
-        Check that the voltage marked on the rating label matches your mains voltage.

Location of Unit

-        The unit must be placed on a flat stable surface and should not be subjected to vibrations.
-        Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.
-        The mains socket must be located near the unit and should be easily accessible.
-        Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources  
         such as radiators or gas/electric fires. Avoid exposure to direct sunlight and other sources of heat.
-        Never place any type of candle or naked flame on the top of or near the unit.
-        To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, 
         dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.
-        If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains 
         immediately. Withdraw the mains plug and consult your dealer.
-        To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other    
         materials do not obstruct the ventilation vents.
-        Do not install or place this unit in a bookcase, built-in cabinet or in another confined space, ensure 
         that a minimum of 10cm should be kept around the apparatus for ventilation.

Safety

-

Always disconnect the unit from the mains supply before connecting/disconnecting other devices or 

         moving the unit.
-        Unplug the unit from the mains socket during a lightning storm.
-        This unit will become warm when used for a long period of time. This is normal and does not indicate 

a problem with the unit.

DANGEROUS VOLTAGE

Conductor dangerous voltage, that may be of sufficient magnitude to constitute a risk of 
electric shock to persons is present within this product's enclosure.

ATTENTION

The owner's manual contains important operating and maintenance instructions, for your 
safety, it is necessary to refer to the manual.

Mains Cable

-        Make sure the unit is not resting on top of the mains cable, as the weight of the unit may damage the 
         mains cable and create a safety hazard.
-        If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly 
         qualified persons in order to avoid a hazard.

Interference

-        The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so, 
         simply reset the product to resume normal operation by following the instruction manual. In case the 
         function could not resume, please use the product in other location.
-        This unit includes micro-processors which may malfunction as a result of external electrical 
         interference/noise or electrostatic discharge. If the unit is not working properly, disconnect the 
         power source and then reconnect it.

Supervision

-        Children should be supervised to ensure that they do not play with the unit.
-        Never let anyone especially children push anything into the holes, slots or any other openings in the 
         case - this could result in a fatal electric shock.

Service/Maintenance

-        To reduce the risk of electric shock, do not remove screws. The unit does not contain any user
-        Serviceable parts. Please leave all maintenance work to qualified personnel.
-        Do not open any fixed covers as this may expose dangerous voltages.
-        Ensure to unplug the unit from the mains socket before cleaning.
-        Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit's  
         Surface.
-    Do not use liquids to clean the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN