23
MENU SETTINGS
Picture menu
Picture Mode:
Choose from Standard, Dynamic, User and
Mild.
Note: Contrast, Brightness, Colour and sharpness are
only available and can be adjusted in the User mode
option in the Picture Mode Settings.
Contrast:
Controls the difference between the brightest
and darkest regions of the picture.
Brightness:
Controls the overall brightness of the picture.
Colour:
Control the colour.
Sharpness:
Increase this setting to see crisp edges in the
picture; decrease it for soft edges.
Tint:
Controls the tint ( NTSC mode only).
Colour Temperature:
Choose from Medium, Cool, User
and Warm.
Red:
Controls the red colour of the picture.
Green:
Controls the green colour of the picture.
Blue:
Controls the blue colour of the picture.
Aspect Ratio:
Choose from , 4:3, 16:9, Zoom1,
Zoom2, and Panorama.
Noise Reduction:
Choose interference noise modes from
Off, Low, Middle, High and Default.
Scan Mode:
Scan from Default, Blind Scan and Network
to select.
Default: Default search program.
Blind Scan: Searches all the programs for the LNB
settings. (This is a long sear
including new Channels).
Network: Search the known channel frequencies for the
selected LNB & Satellite settings at the time of manufac-
ture. (This will be the quickest search)
Channel Type:
FTA (Free to Air) or ALL (Free to Air and
Pay Channels)
Service Type:
DTV (DVB TV) or Radio (DVB Radio) or both
DTV & Radio
Polarization:
Polarization of the LNB (Low noise Block),
(H) Horizontal or (V) Vertical Or Auto (according to the set-
tings in the LNB set-up pane.)Menu Settings
Move Auto:
East or west of Automatic Control continued
to turn the polar axis to the desired position.
Move Continue:
Manual control of the east or the west
continued to turn the polar axis to the desired position.
Move Step:
Control of the east or wes
xed polar
axis step rotation.
Store Position:
Save the current rotation angle of polar
axis.
Goto Position:
Control the polar angle automatically to
the previously saved.
Goto Reference:
Control the angle of polar axis automati-
cally to the default.
GotoX:
Area based on user input parameters, Automati-
cally calculate the satellite over the area,
Control the polar axis rotation to the right place.
Scan Menu
When all the parameters after. Press BLUE button to Tun-
ing the setup menu to enter.
