background image

EN 5

SAFETY INFORMATION

To ensure reliable and safe operation of this equipment, please carefully read all the instructions in 

this user guide, especially the safety information below.

Electrical Safety

 

•  The TV set should only be connected to a main power supply with voltage that matches the label 

at the rear of the product.

•  To prevent overload, do not share the same power supply socket with too many other electronic 

components.

•  Do not place any connecting wires where they may be stepped on or tripped over.

•  Do not place heavy items on any connecting wire, which may damage the wire.

•  Hold the main plug, not the wires, when removing from a socket.

•  During a thunderstorm, or when not using the television for extended period of time, turn off the 

power switch on the back of the television.

•  Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, 

such as bathrooms, steamy kitchens or near swimming pools.

•  Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, 

liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything 

accidentally penetrates the ventilation slots or if the TV set does not work normally.

•  Do not remove the safety covers. There are no user-serviceable parts inside. Trying to service the 

unit yourself is dangerous and may invalidate the product’s warranty. Qualified personnel must 

only service this apparatus.

•  To avoid a battery leakage, remove batteries from the remote control, when the remote is not use 

for long period, or when the batteries are exhausted.

•  Do not break open or throw exhausted batteries into a fire.

Physical Safety

 

•  Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at 

least 5cm (2’’) clearance all around.

•  Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the 

remote control.

•  To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids.

•  Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus 

(including amplifiers) that produce heat.

•  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 

two blades with one wider than the other. A grounding plug has two blades and a third grounding 

prong. The wide blade, or the third prong is provided for your safety. If the provided plug does not 

fit into your outlet, consult an electrician for replacement of the obsolete outlet. 

•  Protect the power cord from being walked on or pinched particularly at plugs. 

•  Unplug the apparatus during lightning storms or when unused for long periods.

•  Refer all servicing to a qualified service personnel. Servicing is required if the apparatus does not 

operate normally or if the apparatus, including the power supply cord or plug, has been damaged 

in any way. 

•  Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus;  when 

the apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.

•  Always connect your television to a power outlet with protective ground connection. 

Summary of Contents for LED-3901-4K













































Reviews: