DAB+ OPERATION
DRC (DYNAMIC RANGE CONTROL)
This causes the radio to reduce the dynamic range of the audio signal.
The purpose of this is to adapt the dynamic range of the audio signal
to listening in a noisy environment.
NOTE:
This is not available on some DAB+ stations.
1. Press the
STOP/MENU
button in DAB+ mode, and use either
on the unit, on the remote to find
<DRC>
. Press the
PLAY/
PAUSE
button on the main unit or
ENTER
button on the remote .
2. Choose between
DRC off
,
DRC high
and
DRC low
using either
on the unit, on the remote control.
3. Press the
ENTER
or
PLAY/PAUSE
button to save the setting.
FACTORY RESET
Follow the below steps to restore to factory settings.
1. Press the
STOP/MENU
button. Use buttons on the unit or
buttons on the remote control to find
2: When you see
< System >
, press
ENTER
button.
< Factory Reset >
, press
ENTER
button.
3. Select
<Yes>
using buttons, then press
ENTER
to reset
process.
NOTE
: Once the reset has been taken place, you will lose all the
stored presets both on DAB+ and FM mode, and the internal DAB+
registry.
SELECT LANGUAGE
Follow the below steps to select the language of the system.
1. Press the
STOP/MENU
button.
2. Use buttons on the remote control to find
<System>
, press
ENTER
button.
3. When you see
<Language>
, press
ENTER
button.
4. Use buttons to select one of the system languages, press
ENTER
button to confirm selection.
/
/
/
12
/
/
/
/
/
/