REPEAT MODE (BY REMOTE HANDSET)
PRESS THE REPEAT BUTTON BEFORE OR DURING PLAY, A SINGLE TRACK, SINGLE ALBUM (MP3 ONLY) OR ALL
THE TRACKS CAN BE REPEATED. EACH PRESS SWITCH THE REPEAT MODE AS FOLLOW:-
FOR CD
REPEAT INDICATOR
(1) REPEAT 1
(2) REPEAT ALL
(3) REPEAT OFF
REPEAT MODE
ON LCD DISPLAY
REPEAT TRACK
REPEAT
REPEAT ALL
REPAT ALL
REPEAT OFF
---------------
FOR MP3 DISC
(1) REPEAT 1
(2) REPEAT ALL
(3) REPEAT ALBUM
(4) REPEAT OFF
REPEAT INDICATOR
REPEAT MODE
ON LCD DISPLAY
REPEAT SINGLE TRACK
REPEAT
REPEAT ALL TRACKS
REPEAT ALL
REPEAT CURRENT ALBUM
REPEAT ALBUM
REPEAT OFF
-----------------
RANDOM PLAY (BY REMOTE CONTROL)
YOU CAN LISTEN ALL THE TRACKS IN A RANDOM ORDER BY THIS FUNCTION
1. PRESS RANDOM BUTTON AND RANDOM INDICATOR LIGHT UP ON THE LCD DISPLAY (1).
2. THE CD/MP3 DISC WILL START PLAYBACK IN RANDOM ORDER.
3. PRESS RANDOM BUTTON AGAIN TO CANCEL RANDOM MODE.
INTRO PLAY (BY REMOTE CONTROL)
YOU CAN LISTEN THE BEGINNING (10 SECONDS) OF EACH TRACK IN A CD BY THIS FUNCTION & SAVING YOUR
TIME TO SEARCH THE DESIRE SONG
1. PRESS INTRO BUTTON AFTER PLACING A CD INSIDE THE UNIT AT CD MODE
2. SYSTEM START PLAYING THE FIRST 10 SECONDS OF EACH TRACK OF THE ENTIRE CD CONTINUOUSLY.
3. PRESS INTRO BUTTON ONCE AGAIN IF IT REACH YOUR DESIRED TRACK FOR NORMAL PLAYBACK.
CD DISC PROGRAMMING
UP TO 64 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS
THE CD STOP BUTTON (3)
1. SET IN CD MODE & STOP THE CD PLAYBACK.
2. PRESS THE MEM/CLK-ADJ BUTTON (4) , MEMORY WILL APPEAR ON LCD DISPLAY (1). MOREOVER, IT
WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP
OR
BUTTONS (9 OR 8).
4. PRESS THE MEM/CLK-ADJ BUTTON (4) TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD PLAY/PAUSE BUTTON (2) TO
PLAY THE DISC IN ASSIGNED ORDER.
7. PRESS CD STOP BUTTON (3) TO TERMINATE PROGRAM PLAY.
DURING PROGRAM MODE, PRESS MEM/CLK-ADJ BUTTON (4) TO REVIEW THE TRACKS CURRENTLY
PROGRAMMED.
MP3 DISC PROGRAMMING
1. FOLLOW THE SAME STEP 1 AND 2 AS CD PROGRAMMING PROCEDURE.
2. SELECT A DESIRED ALBUM NUMBER BY PRESSING SKIP
OR
BUTTONS (9 OR 8).
3. PRESS THE MEM/CLK-ADJ BUTTON (4) TO STORE THE SELECTED ALBUM INTO MEMORY, THEN PRESS
SKIP
OR
BUTTONS (9 OR 8) AGAIN TO SELECT THE TRACK NO. TO BE PROGRAMMED.
4. REPEAT STEPS 2 AND 3 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY
5. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD PLAY/PAUSE BUTTON (2) TO
PLAY THE DISC IN THE ORDER YOU HAVE PROGRAMMED.
6. PRESS CD STOP BUTTON (3) TO TERMINATE PROGRAM PLAY.
THE PROGRAMMING MODEL WILL AUTOMATICALLY STOP IF NO BUTTON IS BEING PRESSED IN A PERIOD
OF ABOUT 10 SECONDS AFTER PRESSING THE MEM/CLK-ADJ BUTTON (4).
E-4
