9
INSTALLATION
Mounting the Navigation Set in A Car
You can fix the holder of the navigation system
to the windscreen, Be sure it does not impede
the view. Then mount the holder with the
enclosed suction plate in any way that will
allow peril-free and safe operation. Install The
Holder Cover to The Navigation System
HOLDER COVER:
There is a nut on the bottom of the navigation
like the following picture:
Install the holder cover (with screw) to the
navigation system. And fasten the navigation
to the navigator holder (By fasten the holder
cover to the holder). Please refer to the following
picture.
Then fasten the navigation with the screw.
(Refer to the following picture)
When the unit is fastened to the car, you
can adjust the angle of the unit like the
show of the arrowhead to get a nice view.
(Refer to the next picture.)
NOTE: When you fasten the unit to the
wind screen, be sure the direction of
the navigation is like the next picture.
Fix the suction plate to a suitable location
on the dashboard. Take care, that the
surface of the dashboard is clean and
press the suction plate strongly onto the
surface.
• To obtain a strong and secure hold the
suction plate should not be used for 24
hours. Place the holder with the suction
head onto the suction plate (or directly
onto the wind screen) and press the
lever on the suction head downwards.
The suction head will stick itself firmly
to the suction plate.