background image

 

 

 

CAUTION 
To avoid failure and damage when using this device, please read this user’s manual and make sure that 
you fully understand the safety and operation instruction. These instructions should be kept for your long-
time reference. 
1.

 

This  speaker  offers  you  2  different  power  supplies:  AC  230V  50/60Hz,  and  rechargeable  lead-acid 
battery DC 12V 2.6Ah.   

2.

 

DO NOT attempt to touch any inside parts of the speaker system to avoid any possible risk of electronic 
shock. 

3.

 

DO NOT attempt to service the system beyond that specified in this operation instructions. All servicing 
should be referred to qualified service centres.   

4.

 

The power cord of the speaker should be un-plugged from the outlet when left unused for a long time. 

5.

 

The speaker should be situated at least 20cm from other appliances so that its location is not interfered 
with proper ventilation. 

6.

 

The speaker should be kept away from heat sources such as radiators, heat register, stoves, or other 
appliance that produce heat. 

7.

 

Never  place  the  speaker  in  the  locations  liable  to  be  splash  nor  put  any  water  containers  on  the 
subwoofer, like glass, cup, vase…… If any liquid or metal parts enter into the speaker, please power OFF 
the power and contact qualified service centres to check the speaker before continuing usage. 

8.

 

When you are not using the speaker, please power off the speaker and unplug the power cord from 
the power supply. 

9.

 

When using a power socket or coupler as a power ON/OFF device, please ensure that this device can 
be easily accessed and operated.   

 

BATTERY CAUTION 

1.

 

Make sure to charge the lead-acid battery for a minimum of 12 hours for the first 3 times of using a 
brand new speaker. 

2.

 

Recharge the battery within 24 hours when the speaker shows in low-power or has run out of power. 
If  you  fail  to  charge  the  battery  within  24  hours,  it  will  reduce  the  life  of  the  battery,  causes  the 
incapability of fully-power-charged and shortens its working time.   

3.

 

Non-professional technicians should not open the speaker or this lead-acid battery. 

4.

 

DO NOT use this lead-acid battery with other device. 

5.

 

If  you  want  to  use  a  new  battery  for  this  speaker,  you  must  use  one  of  the  same  specifications. 
Otherwise, it will cause damage or work failure to the speaker. 

6.

 

Improper battery installation will cause explosion, please ask a qualified service center to replace it.   

7.

 

After  replacing  with  a  new  battery,  please  put  the  disused  battery  into  a  specified  Recycle  Bin  or 
delivery it to a Recycle Institution.   

8.

 

If you do not use the speaker for a long time, FULLY CHARGE THE BATTERY ONE TIME PER MONTH to 
avoid failure of battery. 
 

Summary of Contents for PA-46











Reviews: