Page 9 of 48 pages
LENCO
TFT-711
ENGLISH
BASIC OPERATIONS REMOTE CONTROL
Power button on TFT-711
Slide the switch to the ON position to power ON the TFT-711. To fully switch off the power,
slide the power button to the OFF position.
Stand-by key on IR Remote
The “Stand-by” key is used to put the TFT-711 into the stand-by mode, the unit is still under
power. If the unit is running on batteries, then it will still consume power from the batteries.
To fully switch off the power, slide the POWER button on the TFT-711 to the OFF position.
Note:
When the unit is switched ON, it takes 1-2 seconds for the boot-up procedure and
during this time the LCD will remain black. This is normal operation.
LCD
Press this key to switch OFF the LCD only. You can now listen to the audio only. Switching
off the LCD reduces power consumption and will result in longer battery life. This is a
particular handy feature when in Radio mode.
4:3
Press this key for the correct screen ratio. There are usually three different broadcast ratio’s
for TV signals, e.g. 4:3, 16:9 and 16:9 widescreen. If the unit is receiving 16:9 signals, the
screen is full screen. If the unit is receiving 16:9 widescreen signals, you will see black
banners on the top and bottom of the screen. Press this key to display the TV image in full
screen. If the unit is receiving a 4:3 signal, it is showing the image full screen, this means that
the 4:3 image is stretched to fit the 16:9 screen format. To view the 4:3 TV signal in its
original format press this key again. Toggle sequence:
Original signal
→
16:9 full
→
4:3
→
Original signal
MUTE
Press the Mute key to mute the volume. The MUTE icon will be seen on the LCD. To resume
press mute again.
Number keys 0 .. 9:
The number key can be used for the direct program number entry, or to key-in the Parental
access code. To choose channel 12, press first the [1] then the [2] directly thereafter.
▼▲►◄
keys
Navigation key, to navigate to left, right, up or down in menu selections.
Press the [
▲
CH] key to zap a channel up, press the [
▼
CH] to zap a channel down
TV/RAD key
Press this key to switch between TV and radio programs. If the transmitted DVB-T signal
does not contain any radio programs, the screen will turn dark for a short time and the unit
will fall back to the TV mode. (Radio availability is not supported by all providers)
AV MODE
Press this key to switch between DVB-T and an external connected Audio Video input source
like a Digital (video) camera, game console, DVD player or alike.
MENU
Press the “Menu” key to enter the main menu.
