Page 11 of 48 pages
LENCO
TFT-711
ENGLISH
BASIC OPERATION TFT-711
Power button on TFT-711
Slide the switch to the ON position to power ON the TFT-711. To fully switch off the power,
slide the power button to the OFF position.
Note:
When the unit is switched ON, it takes 1-2
seconds for the boot-up procedure and during this time the LCD will remain black. This is
normal operation.
CH+ / OK / CH-
Slide up [
▲
CH+] to zap a channel up, slide down [
▼
CH -] to zap a channel down. Best
operation of this button is when you rub the switch with a flat positioned finger. When you try
to slide the button with your fingertip, changing channels might be difficult.
Press this button for the
OK
function.
When in menu selections, press this button to confirm your selection. When watching TV or
listing to the radio, press this button to get short channel information. Press again within 5
seconds to get full channel information (Video PID, Audio PID, Frequency, Bandwidth, Signal
Strength, Signal Quality). Press again or wait for ±5 seconds to go back to normal TV screen.
INFO
Press this key to view the current running program information (quick EPG).
TV/RD
Press this key to switch between TV and radio programs. If the transmitted DVB-T signal
does not contain any radio programs, the screen will turn dark for a short time and the unit
will fall back to the TV mode. (Radio availability is not supported by all providers)
FAV
Press these keys to call the TV Main List and Favorite List 1-4 and allow a fast navigation
through the TV or Radio programs stored. Scroll to your desired selection with the CH+ or
CH- keys and press the [
OK
] key to zap to the desired program.
In Teletext mode: Switches the Teletext display to the transparent mode and back.
AV
Press this key to switch between DVB-T and an external connected Audio Video input source
like a Digital (video) camera, game console, DVD player or alike.
LCD - Brightness, Contrast, Saturation and Hue adjustment
Press this key to switch off the LCD only. You can now listen to the audio only. Switching off
the LCD reduces power consumption and will result in longer battery life. This is a particular
handy feature when in Radio mode.
Press and
hold
press the LCD key until you see the LCD setup screen. Adjustments can be
made for Brightness, Contrast, Saturation and Hue. Press the VOL + or VOL - key to
increase or decrease the value. Press the LCD key again to toggle to the next selection. If no
action is done within 5 seconds the screen will disappear automatically.
VOL+ / VOL-
Press this key to raise or lower the volume from 0 - 20. Default volume setting is 10.
MUTE
Press the Mute key to mute the volume. The MUTE icon will be seen on the LCD. To resume
press mute again.