Page 13 of 48 pages
LENCO
TFT-711
ENGLISH
Once the automatic channel search mode is started, the following screen will display
information on the progress of the search and the programs that has been found. The
reception parameters frequency and bandwidth, the signal strength of the channel, the
number of TV and Radio programs, as well as the names of the programs are displayed.
Note:
If Australia is selected as country, appropriate bandwidth and frequency parameters
are automatically selected.
Please wait until the automatic channel search mode has finished. If you want to stop the
channel search, press the
RED
key to cancel.
When the automatic channel search mode is completed, press the
BLUE
key to close the
menu. The information about the found channels is automatically stored in memory. The
TFT-711 switches to the first program found and plays the content of this program. If the
automatic search is canceled (
RED
key), the results will not be stored.
Main Menu Navigation key usage
Key
Function
RED
Function depending menu item
GREEN
Function depending menu item
YELLOW
Closes the sub-menu and returns back one menu level
BLUE
Exit directly the menu and returns to TV viewing mode
EXIT
Go back one selection or in main menu, exit the settings menu
OK
Confirm selection
ARROW UP
▲
Go to the menu item above the current selection. If the first
item of the list is selected, the selection jumps over to the last
item in the list.
ARROW DOWN
▼
Go to next menu item of the list below the current selection. If
the last item of the list was selected, the selection jumps over
to the first item in the list.
ARROW RIGHT
►
Scrolls through the menu items
ARROW LEFT
◄
Scrolls backward thought the menu items
Use these keys to navigate through the following settings menus:
